QUANTITY CALCULATOR
1. SELECT TYPE OF MATERIAL
2. TOTAL SPACE IN M²
Gruppe 1 - Enter your space in m²: m²
- For the basic cleaning of badly soiled surfaces.
- Stain remover, grout cleaner, high grease absorber, mould remover.
- NEUTRALISER FOR ALL ACIDIC CLEANERS!
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- Medium-term protection of heavily used surfaces against stains and soiling.
- Especially suitable for polished surfaces & fine stoneware, high solvent content.
- Breathable. The Goretex effect.
- Transparent.
- Resistant against UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection.
- For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours.
We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².
- One product for all houshold surfaces.
- pH-neutral.
- Citrus Scent
- Without acid or soap, without alcohol.
- Grease absorbant.
- Slightly glossy.
- Biodegradable.
- Environmentally friendly.
- No layer formation or streaks.
- Maintains the slip resistance.
Water-dilutable up to 1:100, also suitable for cleaning using a machine (no froth).
One product for all houshold surfaces.
- Large-scale removal of lime efflorescence.
- Removes lime and cement residues. Mortar and grouting residues.
- Lime, salt and gypsum efflorescence.
- Initial cleaner for cotto and fine stoneware.
- Extremely powerful basic cleaner.
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- For the basic cleaning of badly soiled surfaces.
- Stain remover, grout cleaner, high grease absorber, mould remover.
- NEUTRALISER FOR ALL ACIDIC CLEANERS!
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- Pre-treatment for HIGHLY ABSORBANT materials, such as sandstone, limestone, quartzite, concrete stone, terracotta and many more, before applying Finalit impregnations.
- Basic protection against stains and soiling.
- Consolidator.
- Use pre-treatment if a underfloor heating is installed.
- Use pre-treatment before laying and jointing.
- Jointing aid. Bonding agent. Limestone hardener (pyramids and the Sphinx in Egypt).
- Sandstone hardener (Petra in Jordan).
Important! As a pre-treatment for all sides (including edges) before laying, especially suitable for avoiding efflorescence, stains and joint edge discolouration.
Advantage of treatment on all sides:
- Grouting aid
- Prevents the penetration of moisture and soiling
- Prevents curling
- Prevents discolouration & flaking caused by salt, metals and frost.
- Prevents the penetration of adhesives / silicone with slabs
- Makes cleaning easier
- Protection for subsequent work, such as painter, carpenter, etc. Does not replace the need of covering against mechanical damage! The drying time is approx. 1 hour. The curing time is 24 hours.
Can be diluted 1:3 with water. 1 litre is sufficient for up to 50 m², on all sides 20 m², depending on the absorbing properties of the sub-surface.
- Long-term protection of heavily used surfaces against stains and soiling.
- Breathable. Transparent. The Goretex effect.
- Resistant to UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection.
- For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours.
- Tested by the MA 39 Testing and Research Institute of the City of Vienna.
We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².
plus anti-slip effect
- Slip resistance and long-term protection for floors with smooth surfaces. The gloss remains preserved completely.
- Protection against stains and soiling.
- Breathable. Transparent. The Goretex effect.
- Resistant to UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection. For interior and exterior use! Drying time, 1 - 2 hours, curing time, 24 hours.
Pre-treatment with Finalit No. 21S Pores Filler or No. 21 Fixative Penetrating Stopper is recommended! Care with Finalit No. 40 Citrus Scent Cleaner (without soap or products similar to soap) in order to maintain the slip resistance! The temperature of the object must be above +10°C.
Use undiluted 1 litre is sufficient for 100m².
- One product for all houshold surfaces.
- pH-neutral.
- Citrus Scent
- Without acid or soap, without alcohol.
- Grease absorbant.
- Slightly glossy.
- Biodegradable.
- Environmentally friendly.
- No layer formation or streaks.
- Maintains the slip resistance.
Water-dilutable up to 1:100, also suitable for cleaning using a machine (no froth).
One product for all houshold surfaces.
- Large-scale removal of lime efflorescence.
- Removes lime and cement residues. Mortar and grouting residues.
- Lime, salt and gypsum efflorescence.
- Initial cleaner for cotto and fine stoneware.
- Extremely powerful basic cleaner.
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- For the basic cleaning of badly soiled surfaces.
- Stain remover, grout cleaner, high grease absorber, mould remover.
- NEUTRALISER FOR ALL ACIDIC CLEANERS!
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- Medium-term protection of heavily used surfaces against stains and soiling.
- Especially suitable for polished surfaces & fine stoneware, high solvent content.
- Breathable. The Goretex effect.
- Transparent.
- Resistant against UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection.
- For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours.
We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².
- One product for all houshold surfaces.
- pH-neutral.
- Citrus Scent
- Without acid or soap, without alcohol.
- Grease absorbant.
- Slightly glossy.
- Biodegradable.
- Environmentally friendly.
- No layer formation or streaks.
- Maintains the slip resistance.
Water-dilutable up to 1:100, also suitable for cleaning using a machine (no froth).
One product for all houshold surfaces.
- Large-scale removal of coatings.
- Removes wax, acrylate-based coatings, cotto wax, silicone, epoxy resin residues.
- Paint, resin, acrylate.
Use undiluted 1 litre is sufficient for 20 m².
- Large-scale removal of lime efflorescence.
- Removes lime and cement residues. Mortar and grouting residues.
- Lime, salt and gypsum efflorescence.
- Initial cleaner for cotto and fine stoneware.
- Extremely powerful basic cleaner.
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- For the basic cleaning of badly soiled surfaces.
- Stain remover, grout cleaner, high grease absorber, mould remover.
- NEUTRALISER FOR ALL ACIDIC CLEANERS!
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- Pre-treatment for HIGHLY ABSORBANT materials, such as sandstone, limestone, quartzite, concrete stone, terracotta and many more, before applying Finalit impregnations.
- Basic protection against stains and soiling.
- Consolidator.
- Use pre-treatment if a underfloor heating is installed.
- Use pre-treatment before laying and jointing.
- Jointing aid. Bonding agent. Limestone hardener (pyramids and the Sphinx in Egypt).
- Sandstone hardener (Petra in Jordan).
Important! As a pre-treatment for all sides (including edges) before laying, especially suitable for avoiding efflorescence, stains and joint edge discolouration.
Advantage of treatment on all sides:
- Grouting aid
- Prevents the penetration of moisture and soiling
- Prevents curling
- Prevents discolouration & flaking caused by salt, metals and frost.
- Prevents the penetration of adhesives / silicone with slabs
- Makes cleaning easier
- Protection for subsequent work, such as painter, carpenter, etc. Does not replace the need of covering against mechanical damage! The drying time is approx. 1 hour. The curing time is 24 hours.
Can be diluted 1:3 with water. 1 litre is sufficient for up to 50 m², on all sides 20 m², depending on the absorbing properties of the sub-surface.
- Long-term protection of heavily used surfaces against stains and soiling.
- Breathable. Transparent. The Goretex effect.
- Resistant to UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection.
- For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours.
- Tested by the MA 39 Testing and Research Institute of the City of Vienna.
We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².
- One product for all houshold surfaces.
- pH-neutral.
- Citrus Scent
- Without acid or soap, without alcohol.
- Grease absorbant.
- Slightly glossy.
- Biodegradable.
- Environmentally friendly.
- No layer formation or streaks.
- Maintains the slip resistance.
Water-dilutable up to 1:100, also suitable for cleaning using a machine (no froth).
One product for all houshold surfaces.
- Large-scale removal of lime efflorescence.
- Removes lime and cement residues. Mortar and grouting residues.
- Lime, salt and gypsum efflorescence.
- Initial cleaner for cotto and fine stoneware.
- Extremely powerful basic cleaner.
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- For the basic cleaning of badly soiled surfaces.
- Stain remover, grout cleaner, high grease absorber, mould remover.
- NEUTRALISER FOR ALL ACIDIC CLEANERS!
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- Pre-treatment for HIGHLY ABSORBANT materials, such as sandstone, limestone, quartzite, concrete stone, terracotta and many more, before applying Finalit impregnations.
- Basic protection against stains and soiling.
- Consolidator.
- Use pre-treatment if a underfloor heating is installed.
- Use pre-treatment before laying and jointing.
- Jointing aid. Bonding agent. Limestone hardener (pyramids and the Sphinx in Egypt).
- Sandstone hardener (Petra in Jordan).
Important! As a pre-treatment for all sides (including edges) before laying, especially suitable for avoiding efflorescence, stains and joint edge discolouration.
Advantage of treatment on all sides:
- Grouting aid
- Prevents the penetration of moisture and soiling
- Prevents curling
- Prevents discolouration & flaking caused by salt, metals and frost.
- Prevents the penetration of adhesives / silicone with slabs
- Makes cleaning easier
- Protection for subsequent work, such as painter, carpenter, etc. Does not replace the need of covering against mechanical damage! The drying time is approx. 1 hour. The curing time is 24 hours.
Can be diluted 1:3 with water. 1 litre is sufficient for up to 50 m², on all sides 20 m², depending on the absorbing properties of the sub-surface.
- Long-term protection of heavily used surfaces against stains and soiling.
- Breathable. Transparent. The Goretex effect.
- Resistant to UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection.
- For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours.
- Tested by the MA 39 Testing and Research Institute of the City of Vienna.
We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².
plus anti-slip effect
- Slip resistance and long-term protection for floors with smooth surfaces. The gloss remains preserved completely.
- Protection against stains and soiling.
- Breathable. Transparent. The Goretex effect.
- Resistant to UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection. For interior and exterior use! Drying time, 1 - 2 hours, curing time, 24 hours.
Pre-treatment with Finalit No. 21S Pores Filler or No. 21 Fixative Penetrating Stopper is recommended! Care with Finalit No. 40 Citrus Scent Cleaner (without soap or products similar to soap) in order to maintain the slip resistance! The temperature of the object must be above +10°C.
Use undiluted 1 litre is sufficient for 100m².
- One product for all houshold surfaces.
- pH-neutral.
- Citrus Scent
- Without acid or soap, without alcohol.
- Grease absorbant.
- Slightly glossy.
- Biodegradable.
- Environmentally friendly.
- No layer formation or streaks.
- Maintains the slip resistance.
Water-dilutable up to 1:100, also suitable for cleaning using a machine (no froth).
One product for all houshold surfaces.
- One product for all houshold surfaces.
- pH-neutral.
- Citrus Scent
- Without acid or soap, without alcohol.
- Grease absorbant.
- Slightly glossy.
- Biodegradable.
- Environmentally friendly.
- No layer formation or streaks.
- Maintains the slip resistance.
Water-dilutable up to 1:100, also suitable for cleaning using a machine (no froth).
One product for all houshold surfaces.
- Long-term transparent extreme protection for
- living room tables, wash stands, kitchen worktops, stone tables, ventilated facades. Extreme protection against stains.
- For interior use only! Not suitable for surfaces that have to stay breathable!
- The temperature of the object must be above +10°C. Drying time at room temperature: 5 minutes. Curing time: up to 3 days.
Use undiluted. 1 litre is sufficient for 10 m²
plus anti-slip effect
- Slip resistance and long-term protection for floors with smooth surfaces. The gloss remains preserved completely.
- Protection against stains and soiling.
- Breathable. Transparent. The Goretex effect.
- Resistant to UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection. For interior and exterior use! Drying time, 1 - 2 hours, curing time, 24 hours.
Pre-treatment with Finalit No. 21S Pores Filler or No. 21 Fixative Penetrating Stopper is recommended! Care with Finalit No. 40 Citrus Scent Cleaner (without soap or products similar to soap) in order to maintain the slip resistance! The temperature of the object must be above +10°C.
Use undiluted 1 litre is sufficient for 100m².
- One product for all houshold surfaces.
- pH-neutral.
- Citrus Scent
- Without acid or soap, without alcohol.
- Grease absorbant.
- Slightly glossy.
- Biodegradable.
- Environmentally friendly.
- No layer formation or streaks.
- Maintains the slip resistance.
Water-dilutable up to 1:100, also suitable for cleaning using a machine (no froth).
One product for all houshold surfaces.
- Long-term protection against dirt, finger prints, rust film, stains and soiling.
- DO NOT USE ON FLOORS - RISK OF SLIPPING!
- Can be used to freshen up impregnated walls, kitchen worktops, tables. No fingerprints.
- The drying time is 1 hour. The curing time is 12 hours.
Use undiluted 1 l is sufficient for 200 m².
- For the basic cleaning of badly soiled surfaces.
- Stain remover, grout cleaner, high grease absorber, mould remover.
- NEUTRALISER FOR ALL ACIDIC CLEANERS!
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- High-gloss, long-term protection against environmental influences.
- Freshens up the gloss of floors, gloss finish for matt floors.
- For interior use only! The drying time is approx. 1-2 hours.
The curing time is 24 hours. Can be diluted 1:3 with water. 1 litre is sufficient for 50 m²
- One product for all houshold surfaces.
- pH-neutral.
- Citrus Scent
- Without acid or soap, without alcohol.
- Grease absorbant.
- Slightly glossy.
- Biodegradable.
- Environmentally friendly.
- No layer formation or streaks.
- Maintains the slip resistance.
Water-dilutable up to 1:100, also suitable for cleaning using a machine (no froth).
One product for all houshold surfaces.
